JBL prx712

12 two-way full-range main system/floor monitor
prx712 is a compact and versatile speaker in the prx700 series. it has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main pa.

features

135 db peak spl
12 differential drive low-frequency driver for low-distortion and higher spl
1.5 diameter next generation jbl neodymium compression driver
jbl designed waveguide for accurate coverage
efficient class-d amplifier technology
optimized eq for monitor or front-of-house applications
dsp input section, crossover, dynamic limiting, component optimization, selectable system eq
line level and direct microphone input capability
professional xlr-1/4 combination inputs, rca inputs, and xlr loop-through
multi-angle enclosure for main pa or floor monitor applications
integrated 36 mm pole mount socket with angle down tilt
injection molded handle with backing cup for easy transport
integrated m10 suspension points for easy setup
lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by jbls tour proven duraflexfinish.
cloth backed, dent-resistant 16 gauge steel grilles


power rating1500 w
frequency range (-10 db)main: 44.8 hz 19.6 khz
monitor: 44.8 hz 19.5 khz
frequency response (3 db)main: 55.7 hz 18.2 khz
monitor: 56.5 hz 17.7 khz
coverage pattern90 x 50 nominal
directivity index (di)10.2 db
directivity factor (q)10.4
crossover frequency1.8 khz
maximum splnormal: 135 db
boost: 135 db
signal indicatorslimit: yellow led indicates peak output has been reached and dsp
limiter is acting
signal: green led indicates signal present
power/standby: blue indicates system has power and ready to pass audio,
red indicates system has power but is in a power saving mode and will not
pass audio.
dynamic control (input)dbx type iv limiter circuit
input impedance20k ohms (balanced), 10k ohms (unbalanced)
lf driver1 x jbl 272g 305mm (12 in) woofer
hf driver1 x jbl 2408h-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
enclosureasymmetrical, 18 mm, plywood
suspension / mountingdual 36 mm pole socket, 12 x m10 suspension points
transport1 x injection molded handles with backing cup
finishobsidian duraflex finish
grillepowder coated, obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
input connectors2 x balanced xlr / 1/4 inch input, 2 x unbalanced rca input
output connectors1 male xlr balanced output
dimensions (h x w x d) 612.394 mm x 384.556 mm x 341.376 mm
(24.11 in x 15.14 in x 13.44 in)
net weight19.4 kg (42.5 lb.)