Questo sito utilizza i cookie per garantirti una esperienza migliore. Per rispettare la nuova direttiva e-Privacy, abbiamo bisogno del tuo consenso per impostare i cookie. Leggi di più.
Celestion tf1230s 350w 8ohm lf ferrite
altoparlante da 12 con chassis in acciaio stampato, magnete in ferrite, bobina da 3, potenza 350watt, impedenza 8ohm
caratteristiche
- 600w continuous power handling and 97db sensitivity
- tough 12 ferrite bass/mid loudspeaker with kevlar loaded cone
- optimised magnet assembly delivers impressive power to weight ratio
- 3 high temperature edgewound copper clad aluminium voice coil wound on glass fibre former for enhanced reliability
- double roll surround provides exceptional linearity at extremes of cone excursion
- robust steel chassis for maximum energy transfer
- ideal drop in replacement for mackie srm450 v3/v3
specifiche generali
nominal diameter: 305mm/12in
power rating(1): 300wrms
continuous power rating(2): 600w
eia power rating(3): 450w
nominal impedance: 8ohm
sensitivity(4): 96db
frequency range: 50-4000hz
voice coil diameter: 75mm/3in
chassis type: pressed steel
magnet type: ferrite
magnet weight: 1.7kg/60oz
coil material: edgewound copper clad aluminium
former material: polyimide
cone material: kevlar loaded paper
surround material: cloth-sealed
suspension: single
xmax(5): 4.5mm/0.18in
gap depth: 8mm/0.31in
voice coil winding width: 17mm/0.67in
parametri di thiele-small(6)
d: 0.26m/10.24in
fs: 58.5hz
mms: 49.92g/1.75oz
qms: 3.154
qes: 0.492
qts: 0.426
re: 5.81ohm
vas: 59.15lt/2.09ft3
bi: 14.71tm
cms: 0.148mm/n
rms: 5.82kg/s
le (at 1khz): 1.05mh
informazioni di montaggio
overall diameter: 317.5mm/12.5in
overall depth: 137mm/5.43in
cut-out diameter: 283mm/11.14in
mounting slot dimensions: 13 x 6.6mm/0.51 x 0.26in
number of mounting slots: 8
mounting pcd range: 299mm/11.77in
unit weight: 4.3kg/9.5lb
note
(1)tested for two hours using a continuous, band-limited pink noise signal as per aes standard. power calculated on minimum impedance. loudspeaker tested in free air.
(2)continuous power handling is defined as 3db greater than the aes rating.
(3)tested as per the eia-426-a standard
(4)measured on axis at 1w, 1m in 2pi anechoic environment.
(5)xmax derived from: (voice coil winding width-gap depth)/2.
(6)small signal parameters measured after unit subjected to pre-conditioning signal.
per stampare la scheda prodotto, clicca qui
per una panoramica su tutta la serie celestion tf ferrite, clicca qui
per consultare e scaricare la brochure originale celestion pro audio, clicca qui
Disponibilità | Consegna in 4-5 giorni lavorativi |
---|
The information below is required for social login
Creare un nuovo account